Description
This is a premium 13-gallon milk can distilling boiler, made from NSF certified 304 stainless steel that is 20% thicker than most other milk can boilers on the market. This ensures solid construction and durability for all your distilling needs. The mirror-polished finish gives it a sleek and professional look.
This milk can boiler features a 2″ tri-clamp port with a clamp and face plate that can be used with a 2″ heating element conversion plate for easy installation of an electric heating element, or one of our heating kits! The boiler can also be fired with a propane or wood fire, the flat and recessed bottom makes it stable and easy to use with a variety of setups.
This boiler comes with a 1.5″ bottom port with a drain valve, clamp, and gasket, as well as a 1.5″ tri-clover fitting at the top with a tri-clamp and cap that can be used for filling or adding a thermometer and thermowell. The convenient side handles make it easy to transport.
Choose from a 2″, 3″, or 4″ top lid connection to fit your specific needs. This milk can still boiler is perfect for distilling a variety of liquids, from essential oils to spirits.
This 13-gallon stainless-steel milk can comes with:
- 2-inch tri-clover fitting with clamp and cap
- 1.5″ bottom port with drain valve, clamp, and gasket.
- 1.5-inch tri-clover fitting at the top with a tri-clamp and cap.
Dimensions:
- Bottom/Base Diameter: 13 3/4″
- Height: 28″
Check out our 3-gallon and 8-gallon milk can boilers for smaller units. Trusted by professionals and amateurs alike, this premium milk can still boiler is a game-changer for all your distilling needs.
Rob –
Very nice looking boiler nice welds can wait to complete it
harold –
outstanding quality and fast service..would highly recommend and will be buying again from this company
kyle –
The boiler works great, is well crafted and the additional components work great with my electric heat element and my distillation column. This is the first product I have ever purchased that I wanted to make a review on and convey my gratitude. Thanks you have a customer for life !
Jake –
Down right a work of art!
Clean welds and looks fantastic inside and out.
Definately recommend to anyone wanting a 13 gallon boiler. I was using a 8gallon thick walled alluminum kettle to boil the wort for making beer. This will increase the amount of wort i have for that same amount of prep time.
If your distilling with this, you’ll be distilling in a fanstastic piece of equipment.
Jake –
I just got back from lunch and saw my 13 gallon 3" WORK OF ART!!!!
Quality is top notch, clean welds all all the interconnecting pieces and where the openings are and very shiny/smooth Inside and out.
I use a 8 gallon brewing kettle to make beer and added this to make larger 10 gallon batches. If you are using this to distill, at least you’ll be distilling in a Ferrari rather than a Ford.
Jeremiah –
Beautiful piece of art! Works as good as it looks. All the welds are flawless and that’s saying something coming from me (4th generation welder). Used it a couple times with absolutely no problems. Don’t hesitate to order this.
Allbrite –
Purchased the 13 gallon boiler, upon learning the 8 gallon was in short supply. I am very glad that I did. Great craftsmanship and the boiler heats very evenly, using propane. Cleanup is a breeze, as the opening on top is large enough to get your arm inside and wipe the inside clean, without any need for brushes, etc.. So far, I have about six runs on this thing and have not one single complaint. Was using a homemade 5 gallon stock pot conversion. This is the way to go for convenience, reliability and a high quality output. I built my own tower, using copper, but after doing the math on components, your best bet is to order a tower here that is ready-to-run. Just add some copper packing and you will have the best of both worlds. Thanks, Jeff and crew for great products and service.
jim –
This is a great looking pot. Cant wait to try it. The only thing I didn’t like was the "Moonshine Distiller" written in black on the side. It was hard to get off.
You should have an option to leave it off when ordering.
dnormant (verified owner) –
I was looking for a 7/8 gallon boiler but the configuration of this 13 gallon changed my mind. I am so happy with this kettle, it’s exactly what I wanted. It’s very well built with excellent materials. And, it’s beautiful – My wife want’s to store it in the family room as a piece of art. I haven’t told her yet that I am now going to need a 13 gallon ferment-er. Oh dear.
Mike –
Ive been running this boiler for about 7 months now, and it is a darn fine piece of equipment. I don’t have any complaints at all about the quality of this boiler.
Ron Rice (verified owner) –
Bad ass and freaky fast! If I could give more than 5 stars I would. Thanks y’all!!!!!
William (verified owner) –
Very good shipping time, and they definitely weren’t kidding about built right. This thing is SOLID. It’s built right, it’s built tight. I look forward to doing more buisiness with these guys!
Dennis –
I got this boiler along with a 3 inch reflux column and all the other items needed for operation. I was very happy with how fast I received my order in the mail and it’s quality. I plan to make more purchases from this company in the near future because of their prompt and professional service with out any sacrifice to the quality of their product. Thank you Moonshine Distiller!