Stainless Steel Milk Can Boiler – 13 Gallon

Rated 5.00 out of 5 based on 8 customer ratings
(8 customer reviews)

$289.99

Purchase this product now and earn 579 Points!
SKU: 13GalCan Category: Tags: , , ,

Description

This is a premium mirror polished stainless steel 13-gallon milk can distilling boiler.  It is made from 1.2 mm thick NSF certified 304 stainless steel, making it 20% thicker than most other milk can boilers, and everything is solidly welded. For a cheaper version, check out this 13-gallon stainless steel milk can boiler without extra fittings. This stainless steel still for sale comes with:

  •  2-inch tri-clover fitting with clamp and cap located near the bottom of the boiler for adding an electric heating element.
  • 1.5″ bottom port with drain valve, clamp, and gasket.
  • 1.5-inch tri-clover fitting at the top with a tri-clamp and cap. Can be used as a fill port or to add a thermometer and thermowell.

 

Additional information

Weight 47 lbs
Dimensions 15 × 15 × 28.5 in

8 reviews for Stainless Steel Milk Can Boiler – 13 Gallon

  1. Rated 5 out of 5

    Rob

    Very nice looking boiler nice welds can wait to complete it

  2. Rated 5 out of 5

    harold

    outstanding quality and fast service..would highly recommend and will be buying again from this company

  3. Rated 5 out of 5

    kyle

    The boiler works great, is well crafted and the additional components work great with my electric heat element and my distillation column. This is the first product I have ever purchased that I wanted to make a review on and convey my gratitude. Thanks you have a customer for life !

  4. Rated 5 out of 5

    Jake

    Down right a work of art!

    Clean welds and looks fantastic inside and out.

    Definately recommend to anyone wanting a 13 gallon boiler. I was using a 8gallon thick walled alluminum kettle to boil the wort for making beer. This will increase the amount of wort i have for that same amount of prep time.

    If your distilling with this, you’ll be distilling in a fanstastic piece of equipment.

  5. Rated 5 out of 5

    Jake

    I just got back from lunch and saw my 13 gallon 3" WORK OF ART!!!!

    Quality is top notch, clean welds all all the interconnecting pieces and where the openings are and very shiny/smooth Inside and out.

    I use a 8 gallon brewing kettle to make beer and added this to make larger 10 gallon batches. If you are using this to distill, at least you’ll be distilling in a Ferrari rather than a Ford.

  6. Rated 5 out of 5

    Jeremiah

    Beautiful piece of art! Works as good as it looks. All the welds are flawless and that’s saying something coming from me (4th generation welder). Used it a couple times with absolutely no problems. Don’t hesitate to order this.

  7. Rated 5 out of 5

    Allbrite

    Purchased the 13 gallon boiler, upon learning the 8 gallon was in short supply. I am very glad that I did. Great craftsmanship and the boiler heats very evenly, using propane. Cleanup is a breeze, as the opening on top is large enough to get your arm inside and wipe the inside clean, without any need for brushes, etc.. So far, I have about six runs on this thing and have not one single complaint. Was using a homemade 5 gallon stock pot conversion. This is the way to go for convenience, reliability and a high quality output. I built my own tower, using copper, but after doing the math on components, your best bet is to order a tower here that is ready-to-run. Just add some copper packing and you will have the best of both worlds. Thanks, Jeff and crew for great products and service.

  8. Rated 5 out of 5

    jim

    This is a great looking pot. Cant wait to try it. The only thing I didn’t like was the "Moonshine Distiller" written in black on the side. It was hard to get off.
    You should have an option to leave it off when ordering.

Add a review

Your email address will not be published. Required fields are marked *




Exclusive products

Special category of products